How to Recover Data from an Unrecognized Hard Drive

Hard Drive

When your computer doesn’t recognize a Hard Drive, it can be frustrating. You might think your computer is broken when you can’t access your data. But don’t worry, it’s not your hard drive’s fault. Your computer isn’t recognizing the hard drives for one of many reasons. In this article, we’ll be covering data recovery hard drive from an unrecognized hard drives.

Whether it’s a brand new hard drives or an old one that you’ve removed and re-installed, you should always connect the hard drive to your computer before you try to use it. When your computer doesn’t recognize the hard drive, you won’t be able to access it. If you’re still having problems after trying the solutions below, your drive most likely isn’t formatted or it is not connected properly.

Recognizing your hard drive will help your operating system and programs load faster, which will ultimately make you more productive. This process is not difficult, and there are several ways to do it. Try using one of these methods and see if that helps you recover data from an unrecognized hard drive.

Install The Latest Drivers

If you have updated your operating system but your hard drivers is still not recognized, install the latest drivers. The driver is the piece of software that allows the computer to communicate with all hardware devices, like the hard drive. The driver ensures everything is communicating correctly and running smoothly. If you haven’t updated your drivers in a while, make sure you’ve downloaded the latest ones for your operating system.

To find those updates, start by opening Control Panel and going to Device Manager > Disk Drives > Double click on your unrecognized hard drive > Click Properties > Click Drivers tab > Check for updates

Check and Update BIOS

BIOS stands for Basic Input Output System and is a set of instructions that tell the computer how to read data from a hard drive. You might need to update your BIOS to recognize your hard drive if it’s new. To update BIOS, you’ll want to go into your computer’s settings and make sure the BIOS version is up-to-date.

Check For Malware Infection

Malware is a common cause for a hard drive not being recognized. More than 90% of malware can be removed with just one scan, so it’s worth giving this solution a try first. You can find several free programs online that will allow you to scan your hard drive for malware and remove any threats found.

Once you’ve scanned the hard drivers and cleared out any malware, reconnect the drive to your computer and see if it is recognized. If you still have problems after trying this solution, move on to one of these others.

Try Connecting Your Hard Drive To Another Computer

If your hard drive has a problem, you need to confirm the hard drive itself is not the issue. To do this, connect your hard drivers to another computer and see if it recognizes it. If it does, then your hard drive just needs formatting or an update.

Make Sure The Hard Drive Is Properly Connected

One of the most common reasons your computer won’t recognize hard drivers is because the hard drivers isn’t connected properly. Make sure that you have plugged in the SATA, power, and data cables to the back of your computer. The data cable should be plugged into a USB port on the back of your computer. If you don’t have any free USB ports, use a USB hub to connect them to your computer.

If everything seems connected and it still won’t show up on your computer, make sure that there are no programs running that could be interfering with the hard drivers. Close all programs and open up Disk Management by typing “disk management” in the Windows search bar or Control Panel>Administrative Tools>Computer Management>Disk Management. From there, you can see if it is recognized or not.

Lastly, make sure that the hard drive is formatted for your operating system – this will help ensure that your operating system recognizes it correctly. You can format an unrecognized hard drive using Disk Management as well; just right-click on the newly installed or removed hard drive and select “Format”.

Format The Hard Drive

Click on the Start button and type “disk management”

Right-click on the unrecognized hard drivers, also known as unallocated space, and click Format

Delete all files from the hard drivers by selecting it and clicking Delete

Enter a new file system for the device. FAT 32 is more compatible with Windows systems.

Choose Quick Format to avoid wasting time waiting for formatting to complete

Disable Fast Boot In BIOS

Your computer might not recognize your hard drivers because of a BIOS setting called “fast boot.” You can disable this setting to make your computer recognize the hard drivers. First, restart your computer and enter BIOS settings by pressing F2 or DEL on startup. In the BIOS settings, find the “Fast Boot” option and disable it. Save the changes to BIOS and your hard drivers should be recognized.

Try Connecting The Hard Drive To Another Port

If your hard drive isn’t recognized in the first place, it might not be connected properly.

Connect the hard drivers to another port on your computer. If you can access the data, then you know there’s something wrong with the current port on your computer, which means you need to check that connection.

Check if Windows is recognizing the drive

If you have a brand new hard drive, Windows may not be recognizing it. You’ll need to first connect the drive to your computer via the SATA or USB cable in order for Windows to recognize it. If Windows doesn’t recognize the hard drivers after connecting it, try restarting your computer. Once you restart your computer, Windows will automatically recognize the hard drivers and assign a letter to it.

Leave a Reply

Your email address will not be published.

Recent Comments

No comments to show.

Archives

Categories